Nanogenerator Powers Up

Nanogenerator Powers Up

A device containing piezoelectric nanowires can now scavenge enough energy to power small electronic devices.

Devices that harvest wasted mechanical energy could make many new advances possible—including clothing that recharges personal electronics with body movements, or implants that tap the motion of blood or organs. But making energy-harvesting devices that are compact, flexible, and, above all, efficient remains a big challenge. Now researchers at Georgia Tech have made the first nanowire-based generators that can harvest sufficient mechanical energy to power small devices, including light-emitting diodes and a liquid-crystal display.

The generators take advantage of materials that exhibit a property called piezoelectricity. When a piezoelectric material is stressed, it can drive an electrical current (applying a current has the reverse effect, making the material flex). Piezoelectrics are already used in microphones, sensors, clocks, and other devices, but efforts to harvest biomechanical energy using them have been stymied by the fact that they are typically rigid. Piezoelectric polymers do exist, but they aren't very efficient.

Zhong Lin Wang, who directs the Center for Nanostructure Characterization at Georgia Tech, has been working on another approach: embedding tiny piezoelectric nanowires in flexible materials. Wang was the first to demonstrate the piezoelectric effect at the nanoscale in 2005; since then he has developed increasingly sophisticated nanowire generators and used them to harvest all sorts of biomechanical energy, including the movement of a running hamster. But until recently, Wang hadn't developed anything capable of harvesting enough power to actually run a device.

In a paper published online last week in the journal Nano Letters, Wang's group describes using a nanogenerator containing more nanowires, over a larger area, to drive a small liquid crystal display.

To make the generator, Wang's team dripped a solution containing zinc-oxide nanowires onto a thin metal electrode sitting on a sheet of plastic, creating several layers of the wires. They then covered the material with a polymer and topped it with an electrode. The resulting device is about 1.5 by two centimeters and, when compressed 4 percent every second, it produces about two volts, enough to drive a liquid-crystal display taken from a calculator. "We were generating 50 millivolts in the past, so this is an enhancement of about 20 times," says Wang.